ONVIF Device Manager is an open-source software application (currently available for Windows only), which scans your network for cameras, DVR's, and NVR's, trying to locatea stream address that can then be used for connecting your device to Angelcam.

• Onvif Device Manager User Manual
• Onvif Device Manager Macos
• Onvif Device Manager Macos 10.13

ONVIF Device Manager is a software application used to administrate network video servers and cameras within CCTV systems. The User Guide describes the product installation, video encoder, network and analytics configuration, the software update and troubleshooting. ONVIF Device Manager is a Network Video Client (NVC) to manage Network Video Transmitters (NVT), Network Video Storage (NVS) and Network Video Analytics (NVA) devices. Thus you need to set up via.

Who should use this?

If you’ve already setup port-forwarding for your device, but Angelcam can't find a stream automatically and/or:

• Your device documentation doesn't mention a RTSP or MJPEG stream path
• Your camera supplier or manufacturer provides no support
• You can't find any documentation or information on Google

Finding a stream path

• Step 1: Be sure that you are on the same network as the device you're trying to discover (advanced users can also try to find a stream address for remotely accessible cameras as well, just use the 'Add' button and specify the public address and forwarded ONVIF port of the remote device)
• Step 2: Download and install ONVIF Device Manager (Windows only)
• Step 3: Click the 'Refresh' button to scan your network
• Step 4: Select 'Live Video' from the menu

• Step 5: Copy the stream address, shown under the live video, to your clipboard (be sure to replace your local IP address with the public one when connecting directly)
• Note: if your camera is password protected, be sure to enter your credentials in the upper left corner.

Connecting a camera to Angelcam

a) With AngelBox

• Step 1: Open AngelBox's Camera Connector, type in your AngelBox's ID, and let AngelBox detect your device
• Step 2: Once found, click, 'I want to use a different camera stream channel'
• Step 3: Paste the stream address from your clipboard and delete everything except the part after the port. For example if your camera stream has been discovered at 'rtsp://admin:1234@192.168.1.100:554/cam/realmonitor?channel=1&subtype=1' use '/cam/realmonitor?channel=1&subtype=1' only.

A more detailed procedure is explained here.

b) Without AngelBox

• Step 1: Port forwarding needs to be configured on your router for the designated camera
• Step 2: Open Camera Connector
• Step 3: Paste the stream address
• Step 4: Replace the local IP address with the public IP address of your network
• Step 5: Replace the stream port of the camera with the port you set up during the configuration of port forwarding in Step 1

A more detailed procedure is explained here.

And that's it! 👏

If you have any further questions please don’t hesitate to contact us at support@angelcam.com.

Still need further assistance? Why not check out our Angelcam Community, where you can connect with other users who are sharing their own experiences and insight into various Angelcam topics and problems.

Released:

Python Client for ONVIF Camera

Project description

ONVIF Client Implementation in Python

Dependencies

Python 2.x (For a Python 3 compatible fork, see https://github.com/FalkTannhaeuser/python-onvif-zeep)

suds >= 0.4

Install python-onvif

From Source

You should clone this repository and run setup.py:

From PyPI

Getting Started

Onvif Device Manager User Manual

Initialize an ONVIFCamera instance

Now, an ONVIFCamera instance is available. By default, a devicemgmt service is also available if everything is OK.

So, all operations defined in the WSDL document:

are available.

Configure (Control) your camera

To configure your camera, there are two ways to pass parameters to service methods.

Dict

This is the simpler way:

Type Instance

This is the recommended way. Type instance will raise anexception if you set an invalid (or non-existent) parameter.

Use other services

ONVIF protocol has defined many services.You can find all the services and operations here.ONVIFCamera has support methods to create new services:

Or create an unofficial service:

ONVIF CLI

python-onvif also provides a command line interactive interface: onvif-cli.onvif-cli is installed automatically.

Interactive mode

NOTE: Tab completion is supported for interactive mode.

References

Release historyRelease notifications | RSS feed

0.2.0

0.1.3

0.1.2

0.1.1

0.1.0

Download files

Download the file for your platform. If you're not sure which to choose, learn more about installing packages.

Onvif Device Manager Macos

Hashes for onvif-0.2.0.tar.gz

Onvif Device Manager Macos 10.13